M-F 8a-5:30p PST |
1/2" x 10 ft DOS 2-Leg Wire Rope Bridle Sling - 8800 lbs WLLImage shown may be a stock photo and is for reference only.

1/2" x 10 ft DOS 2-Leg Wire Rope Bridle Sling - 8800 lbs WLL

Item #:WRBDOS012X10
USUALLY SHIPS:24hrsDetails
  • This product is eligible for FREE SHIPPING on orders over $199.
  • This product is rated for overhead lifting.

  • Product Description
  • Specifications
  • Safety Notice
  • 1/2" x 10 ft DOS 2-Leg Wire Rope Bridle Sling - 8800 lbs WLL

    • Two leg wire rope bridle with sling hooks at end of each leg, a very popular style
    • Using multiple legs helps with load stability and control during lift, ideal for picks where multiple pick points are needed / desired
    • Made from 6x19 class wire rope, IWRC EIPS specification
    • Eyes are professionally formed using a 500T hydraulic swage press
    • Eyes are buffered with heavy-duty steel thimbles…they provide protection against wear and deformation of the wire rope eye and promote a longer service life for sling
    • Available with vinyl or metal load tag
  • Model
    Wire Rope Size
    Double Leg DOS
    6x19 Class
    Length (ft)
    WLL @ 60º (lbs)
    WLL @ 45º (lbs)
    WLL @ 30º (lbs)
    Safety Factor
    Approx. Weight (lbs)
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.