NEED HELP? CALL US NOW
800-442-7454
Crosby 1-1/2" G-2130 Bolt Type Anchor Shackle - 37400 lbs WLL - #1019631

Crosby 1-1/2" G-2130 Bolt Type Anchor Shackle - 37400 lbs WLL - #1019631

Item #:CR-1019631
USUALLY SHIPS:24hrsDetails
Price:$253.00
Quantity:
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Crosby 1-1/2" G-2130 Bolt Type Anchor Shackle - 37400 lbs WLL - #1019631

    • Forged - Quenched and Tempered, with alloy bolt
    • Working Load Limit permanently shown on shackle
    • Hot-dip galvanized
    • Fatigue rated
    • Satisfies ASME B30.26 requirements
    • Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)
  • Mfg Part #
    1019631
    Model
    G-2130
    Size
    1-1/2"
    Type
    Bolt Type Anchor
    WLL (lbs)
    37,400
    Safety Factor
    6:1
    Overall Length
    10.00"
    Inside Length
    5.75"
    Inside Width
    3.88"
    Throat Opening
    2.38"
    Pin Diameter
    1.66"
    Approx. Weight (lbs)
    19
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.