M-F 8a-5:30p PST |
800-442-7454
Crosby 1/2" x 12" HG-226 Eye & Eye Turnbuckle - 2200 lbs WLL - #1031350Image shown may be a stock photo and is for reference only.

Crosby 1/2" x 12" HG-226 Eye & Eye Turnbuckle - 2200 lbs WLL - #1031350

Item #:CR-1031350
USUALLY SHIPS:3 - 5 DaysDetails
Price:$64.50
Quantity:
Purchase over $500 of Crosby products and receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Crosby 1/2" x 12" HG-226 Eye & Eye Turnbuckle - 2200 lbs WLL - #1031350

    • End fittings are Quenched and Tempered, bodies heat-treated by normalizing
    • Hot-dip galvanized steel
    • Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
    • TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY
    • Modified UNJ thread on end fittings for improved fatigue properties, body has UNC threads
    • Lock nuts available
    • Fatigue rated
  • MPN
    1031350
    Model
    HG-226
    Size
    1/2" x 12"
    Type
    Eye & Eye
    Material
    Galvanized Steel
    WLL (lbs)
    2,200
    Safety Factor
    5:1
    Inside Eye
    0.71"W x 1.41"L
    Take Up
    12.36"
    Approx. Weight (lbs)
    2.63
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.