hOpen Now

Climb Right Aluminum Tree Climbing Spurs & T-Pads

Climb Right Aluminum Tree Climbing Spurs & T-PadsClimb Right Aluminum Tree Climbing Spurs & T-PadsClimb Right Aluminum Tree Climbing Spurs & T-Pads
SKU: CLR-91226MPN: 91226


  • USUALLY SHIPS: 1 - 2 Days
  • Made in the United States of America!

Product Description

Climb Right's climbing spurs feature a patented design which gives that strength, durability and style! Unlike 1-piece climbers, these utilize a 2-piece design with a lower "J" portion that is precision milled to exact tolerances. It is then matched to an aerospace grade aluminum upright.

These climbers also use Climb Right's "Quick Change" gaffs. These forged gaffs use a rapid-change 2-screw design that enables the operator to switch or replace the gaffs with ease. Another great feature is the dual purpose "Grip Strip" on the bottom of the lower "J" portion. This patented feature provides added traction while walking on tree limbs, and doubles as a wear strip to inform you when it's time you replace your spurs.

Climb Right is the brand of spur we sell most, and the brand we feature in our Tree Climbing Kits. We've sold hundreds of pairs over the years with positive feedback. Additionally, these spurs are made right here in the U.S.A.!

  • Calf adjustment from 15-3/4" - 18-3/4"
  • Machine-grade aircraft quality aluminum, heat-treated to T6
  • Spike length is 2-5/8", and is made from 4340 steel that is Quenched and Tempered (Breaking Strength of 40,000 lbs)
  • Manufactured to ASTM-F-887-97 standards
  • Complete set ships with composite T-Pads and straps (both lower and upper)

* Climb Right recommends a combined body, clothing and tool weight of 350 lbs or less for use with their climbers.


Tree Spikes
Weight (lbs)

Questions & Answers

4 Questions & 3 Answers
from Norwood, NC asked:
January 30, 2021
Will a 2 strap pad on Climb Right tree spurs eliminate twisting around the leg?

from Crosby, TX asked:
December 26, 2020
Do you sell replaceable tree gaffs for these climbers?
1 Answer
Yes, they are available at this link.
Submitted by: WRS on December 28, 2020

from Hayward, WI asked:
September 15, 2019
What is the weight limit on these spurs including gear?  What do these spurs weigh with pads, please specify per single or pair.
1 Answer
Total weight limit is 350 lbs per pair.† The weight of this particular spur set itself is approximately 6.2 lbs when assembled--this is for the whole kit, left and right leg including pads and straps.†
Submitted by: WRS on September 16, 2019

from Louisiana asked:
September 4, 2019
I plan on using these for hunting.  How do they work with rubber boots.  Where I hunt, Iím normally in knee high rubber boots because there is usually some water I have to travel through to stand. Please advise.  Semper Fi.
1 Answer
We do not have any customers that have specifically mentioned this, so we cannot give you a solid answer.† Most climbers are using some sort of traditional leather boot.† We would say it depends on the type of rubber boot you have, how firm/solid it is.† You must be able to tighten the leg straps (both upper and lower) sufficiently to keep the spurs in place and have the pads do their job.† Our only concern is a rubber boot may not be rigid enough to accomplish this, but again, it depends on the type of rubber boot you're using.
Submitted by: WRS on September 5, 2019

Product Reviews

Be the first to write a review!



Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.