hOpen Now

FallTech Contractor 50 ft Leading Edge Cable SRL - #727650LE

FallTech Contractor 50 ft Leading Edge Cable SRL - #727650LE
SKU: FT-727650LEMPN: 727650LEGTIN/UPC: 848013028297
  • USUALLY SHIPS: 1 - 2 Days
Purchase over $300 of FallTech products and use Promo Code: FALLTECH10 to receive a 10% discount off your order total! *Restrictions may apply

Product Description

The FallTech Contractor LE SRD is designed to provide the highest level of safety when working around unprotected sides and edges, including leading edges. Each unit is tested to the most rigorous global standards, including third party certification and compliance with ANSI Z359.14-2014 LE.

  • Designed to reduce the risk of cable failure when contacting an edge during a fall event
  • May be used as a traditional SRD for overhead anchorage options or in below harness D-Ring anchorage conditions
  • Dual energy absorber system--internal inertial brake and external shock pack--reduces risk of cable failure when contacting an edge during a fall event
  • Load-indicating swivel carabiner with 3,600 lbs gate strength
  • Worker Weight Capacity: 310 lbs
  • ANSI Z359.14-2014 LE Class B, ANSI Z359.13, OSHA CFR1910.66, OSHA CFR1926.502


Cable Diameter
Length (ft)
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews



Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.