hOpen Now
W R S
#

Crosby 7/16" G-209 Screw Pin Anchor Shackle - 1-1/2 Ton WLL - #1018437

Crosby 7/16" G-209 Screw Pin Anchor Shackle - 1-1/2 Ton WLL - #1018437
SKU: CR-1018437MPN: 1018437
$11.02
Quantity
  • USUALLY SHIPS: 1 - 2 Days
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Forged - Quenched and Tempered, with alloy pin
  • Working Load Limit permanently shown on shackle
  • Hot-dip galvanized
  • Fatigue rated
  • Satisfies ASME B30.26 requirements
  • Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)


Specifications

MPN
1018437
Model
G-209
Size
7/16"
Type
Screw Pin Anchor
Material
Carbon Steel
WLL (tons)
1-1/2
WLL (lbs)
3,300
Safety Factor
6:1
Inside Length
1.69"
Inside Width
1.16"
Throat Opening
0.75"
Pin Diameter
0.50"
Weight (lbs)
0.38

Questions & Answers

1 Question & 1 Answer
Tim
from San Fransisco, CA asked:
August 29, 2018
Does this pin fit in a 1/2" hole?
1 Answer
It really depends on how true the hole diameter is. The pin is spec'd out at 0.50" so if the 1/2" hole is a little oversized it might fit, but cannot be guaranteed. Keep in mind too that forged products like shackles have a little variation too from one pin to the next.
Submitted by: WRS on August 29, 2018

Product Reviews

4.0
1 Reviews
5
0% (0)
4
100% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (1 of 1 responses)
By Ron
Montana
Great Product for the Price
October 19, 2019
This is a very good shackle for lighter duty jobs. It is easy to connect and is well made.

Video


Attachments

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.