hOpen Now
View CartCheckout
v
VIEW CART

USR 1/8" x 0.375" Zinc-Plated Stake Eye

USR 1/8" x 0.375" Zinc-Plated Stake Eye
Image shown may be a stock photo and is for reference only.
USR 1/8" x 0.375" Zinc-Plated Stake Eye
SKU: USR-F-30-412-Z
1 - 249$1.92
250 + $1.64
PRICE PER:Each
QUANTITY:
SHARE THIS PRODUCT
  • USUALLY SHIPS: 1 - 2 Days
  • This product is imported. Country of Origin subject to change.

Product Description

  • Typically used to terminate galvanized aircraft cable
  • Light-duty fitting, commonly used to make a leash, tether or pull cable assembly
  • NOT RECOMMENDED FOR FALL ARREST, OVERHEAD LIFTING OR OTHER CRITICAL APPLICATIONS

* Hydraulic press with proper dies recommended for correct sleeve installation.

Specifications

Wire Rope Size
1/8"
Type
Stake Eyes
Material
Zinc-Plated Steel
Color
Silver
Overall Length
2.240"
Overall Width
0.850"
Inside Eye
0.375"
Weight (lbs)
0.048

Questions & Answers

There are no questions or answers for this item.


Show Questions & Answers

Product Reviews

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.