Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/8" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 3/16" Malleable Clip MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL MSRP: $0.45 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Forged Jaw & Jaw Turnbuckle - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishRound load pins in jaw are supplied with cotter keysLocking nuts availableMeets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $29.75 Add to Cart Compare Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Forged Turnbuckle Body Only - 500 lbs WLL Forged, heat-treated steelHot-dip galvanized finishDrilled and tapped (blanks available upon request)Meets requirements of ASTM Specification F1145-92, Type 1, Grade 1 MSRP: $9.69 Add to Cart Compare Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Regular Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $7.94 Add to Cart Compare Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Shoulder Eye Bolt - 500 lbs WLL Drop forged and heat-treated steel Hot-dip galvanized Pulled at a uniform rate of speed in a direct tension when tested UNC threads before galvanizing, furnished with hex nuts tapped oversize MSRP: $8.92 Add to Cart Compare Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4" x 4" Stub End Turnbuckle - 500 lbs WLL End fittings are Quenched and Tempered or normalized, bodies heat-treated by normalizingComplete assembly is self-coloredReference American Welding Society Specifications for proper welding... MSRP: $14.38 Add to Cart Compare Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1" #4 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.40 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1-1/2" #7 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.69 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1-1/8" #5 U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.52 Add to Cart Compare Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/4"-20 x 1-1/8" #5L U-Bolt Assembly Round Bend U-Bolts for steel or wrought iron pipe. Made from low carbon steel and supplied with NC rolled threads, base plate and (2) hex nuts. MSRP: $1.78 Add to Cart Compare Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 1/8" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected × OK
Chicago Chicago 3/16" Malleable Clip Light-duty clip, not for use in heavy-duty applications Galvanized finish for corrosion protection Meets Federal Specification FF-C-450, Type 1, Class 2 MSRP: $1.48 Add to Cart Compare Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected
Chicago Chicago 3/16" x 1" C-1 Turned Eye Bolt - 38 lbs WLL Manufactured from low carbon, cold drawn steel wire Standard NC rolled, machined threads with one hex nut Zinc-plated finish to resist corrosion LIGHT-DUTY USE ONLY NOT RECOMMENDED FOR OVERHEAD... MSRP: $0.45 Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 16 Next Previous 6 7 8 9 10 11 12 13 14 15 16 Next Compare Selected